59 products found. Go to page:
|
|
|
 | | | TM Buell XB 9/12 04-10 REAR pulley 65T | €275,00 Add to cart | | Twin Motorcycles Buell XB 9/12 aftermarket rear pully. Fits all Buell XB 9/12 models 2004=2010.
65 tooth Pully.Black hard anodized for long lasting.
Works with a 65 tooth rear sprocket and a 27 tooth front sprocket with G0500.1HHA belt. This will NOT WORK on 2003 models with the G0500.02A8R belt.
IDLER PULLEY CAN B... | |
|
|
|
 | | | Buell XB9/12 TM Engine Mount (front isolater) | On request | | REPLACEMENT FOR Partnr.L1501.02A8 made by Twin Motorcycles
Buell XB engine mount (front Isolator) for all Buell XB 9/12models from 2002-2010. This part isBlack Anodized to guarantee a long lasting black look.
This Engine mount uses the exsisiting Bolt on your Buell. Clean the OEM bolt and greese it before mounting The... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Heat shrink clutch cable leak repair 20 cm | €7,00 Add to cart | | Heat shrink clutch cable leak repair 20 cm
fix you oil sweating clutch cable , or protect for outer cable rubbing to chin spoilers ect
shrinks from 19 mm to 6 mm with heat activated glue layer inside , so the fix will be oil tight
sold in a lenght off 20 cm
slide over the cable and heat with heat gun
| |
|
|
|
 | | | Buell XB 9/12 O-ring set for fuel pump ( 2x ) | €5,31 Add to cart | | Buell XB9 and XB12 2003-2010O-ring set for fuel pump ( 2x )
This is the Twin Motorcycles replacement O-ring set (OEM P0121.02A8A are obsolete) for all Buell XB models fuel pump.
sold in a set of2 pieces o-ring
mount with a small amount off rubber lubricant partnumber 526223
can be found here , or similair produc... | |
|
|
|
 | | | Buell XB and Buell 1125 axle tool | €10,25 Add to cart | | Axle tool for all Buell XB 9/12 and all Buell 1125R and 1125CR models,very usefulltool for your tool box.
For all XB and 1125 front and rear wheel and Swing arm axles 2003-2010
size 22mm ( 7/8 ) with 1/2 inch connection
| |
|
|
|
 | | | O-ring kit (4 pieces) for TM intake flange | €11,20 Add to cart | | This is a Maintenance kit and comes standard installed in the Intake flange kit CTC-100-30 we developend. When you order the intake flange kit for the first time they come installed. You do not need to order this.
We advice to order a extra set of o-rings when ordering this for the first time. So when you need to replace... | |
|
|
|
 | | | Buell Injector inlet filter | €2,19 Add to cart | | Buell Injector inlet filter sold per piece,
for all XB, 1125 models with Siemens / Dekra injectors ( all Xb 2004 - up and all 1125 models )
O-rings top end bottem ANSU08
| |
|
|
|
 | | | Loctite 272 High Temp, High Strenght Red Theadlock | €106,00 Add to cart | | Loctite 272 High Temperature, High Strength Red Threadlocker 50ml Bottle
Top Pick Loctite® 272™ High Temperature, High Strength Red Threadlocker withstands temperatures to 450°F (200 deg C ). Provides a fast cure on most surfaces, including "as received" fasteners. Recommended for bolts up to 1 1/... | |
|
|
All prices are excl. VAT.
