181 products found. Go to page:
|
|
|
 | | | Mikuni HSR 42 jetting kit | €146,00 Add to cart | | Mikuni HSR 42 jetting kit
Jet Kits For HSR-42
Made in Japan
96,
97 and
98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box
HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each);
| |
|
|
|
 | | | Big end Crankpin for XL00-UP press/weld in | €279,00 Add to cart | | Bigend Crankpin for XL00-UP and Buell Aircooled engine 2000-2007
press/weld in
This press-in and weld-on crank pin allows professional engine builders to rebuild the stock crank of 2000 to present Sportsters and air cooled Buells when used with your choice of 1952-1986 loose roller or 1987-1999 Sportster assembly styl... | |
|
|
|
 | | | Breather bolt straight ( x1 ) | On request | | Breather bolt straight ( x1 )
1/2-13 thread
for replacement on OEM air box system om Sportster or Buell Tube frame models
can be used for replacement ofP0235.9B
| |
|
|
|
 | | | Super E Shorty Carburetor Kit XL Buell 91-03 | €695,00 Add to cart | | Super E Shorty Carburetor Kit XL Buell Tube frame models 91-03
Super E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
If there is a doubt as to which carburetor to use, we suggest the 1-7/8" Super E
Each... | |
|
|
|
 | | | Buell XB, Tube, XL Timer stud set for ignition | €16,00 Add to cart | | Buell XB, Tube, Sportster Timerstud, to mount and adjust the ignition pickup plate, sold per set. ( 2x ) come with button head screws , counter sunck screws need to be ordered aditionaly
replacement for OEM number32606-82
Used on the following models:
1979-1985 SPORTSTER 1000 XLCR
1979-1985 XR1000 1977
1986-1990 ... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Buell X1, S3 XB9 2003 injector set (2 pieces) | €129,00 Add to cart | | Injector set for Buell X1 S3 XB9 2003 ( 2x ) refurbished
replacement injector you need to buy these as set ( 2x ) so the match in the bike
replacement for theP0786.02A8
Used on
Buell X1 1999-2001
Buell S3 1999-2001
Buell S3T 2000-2002
Buell XB9 2003
| |
|
|
|
 | | | Buell XB 9/12 03-07 High Performance Oil pump gear | €179,00 Add to cart | | Buell XB 9/12 03-07 High Performance Oil pump gear
This is the High performance Oil Pump Drive Gear. Fit's on old tube frame models Buell S1, S2, S3, X1, M2 and Buell XB9/12 and Sportser from 1988 and up models.
It is the stronger version made than the Byrilium bronze one, hardeneded steel
This will fit all Bue... | |
|
|
|
 | | | Hastings 3,5 inch bore OS 0.10 piston ring kit | €26,26 Add to cart | | Hastings 3,5 inch bore OS 0.10 piston ring kit ( for Wiseco pistons ) set for 2 pistons
Std cyl. bore: 3.4980" (88.85 mm). 1st. ring: 1.6mm. 2nd ring: 1.6mm. oil ring: 4.0mm. Tech tip: Piston grooves vs piston rings. It's not difficult to determine if a Hastings piston ring set will fit a certain piston. You sho... | |
|
|
All prices are excl. VAT.
