279 products found. Go to page:
|
|
|
 | | | Piston pin Buell tube and Sportster | On request | | Piston pin Buell tube and Sportster
Oem piston pin for all Buell models 1995-2002
and all Sportster models 1991-2003
sold per piece
| |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | Crank bigend revision all models ( bolted crank ) | €756,00 Add to cart | | Crank bigend revision all models ( bolted crank )
includes ;
dis -/ assembly Crank,
mounting and Honing new connecting rod races,
mounting honing new Big-end pin
shimming side play with custom made washers
trueing the flywheel assembly
you need to send us your flywheel assembly
| |
|
|
|
 | | | Buell 1125R 1125CR Clutch Slave Cylinders | €219,00 Add to cart | | Buell 1125R and 1125CR aftermarket Clutch Slave Cylinders with lifetime warranty.Fits all Buell 1125R and 1125CR models from 2008-2010 and EBR models
the slave cylinder comes complete with crush washers for the hydraulic line , al you need exstra is brake fluid
Replacement clutch slave cylinder for the Buell 1125R and... | |
|
|
|
 | | | Buell S3 S3T and X1 Fuel Pump 1999-2002 | On request | | Buell X1S3 S3T complete fuel pump sytem.Fits all: 1999-2000-2001-2002 Buell X1 S3 S3T models.OEM limited supply
replaces partnumbers;
62199-99Y , 62199-99YA, 62199-99YB
P0130.KC P131.K
| |
|
|
|
 | | | Buell 1125 R/CR High performance clutch kit | €299,00 Add to cart | | Buell 1125R and 1125CR 2008-2010 all models.High performance clutch kit. This kit consists of 9 friction plates, 10 steel plates, set off 6 x heavy duty springs. The Clutch springs are shorter than Original but 12% stonger at working height, installation and torque spec's are the same asstock.
For a good working of t... | |
|
|
|
 | | | Buell 1125 R/CR TM Crank TDC locking tool | €51,45 Add to cart | | Twin Motorcycles own developed Buell 1125R and 1125CR 2008-2010 Crank TDC locking tool.
This tool is a easy to use tool developed by Twin Motorcycles to lock the Buell 1125R and Buell 1125CR crank in TDC for service on camshafts or timing chain adjustments. Also used when removing the Rotor.
The tip is made of hardend... | |
|
|
|
 | | |
|
|
 | | | Kpmi valve guide intake, STD cast iron 7 mm | €16,00 Add to cart | | KPMI Valve guide, intake STD 7 mm
REPLACEMENT FOR OEM 16465-06 INTAKE valve guide
Cast iron. Standard size dimensions: 0.5620" O.D. (14.27mm); 0.2750" I.D. (6.99mm); 2.02" OAL (51.31mm). Cast iron offers maximum durability and wear resistance which is perfect for long distance touring applications. It i... | |
|
|
All prices are excl. VAT.
