64 products found. Go to page:
|
|
|
 | | | Motogadget, mo.lock digital NFC ignition switch | €142,00 Add to cart | | Motogadget, mo.lock digital NFC ignition switch
NFC (Near Field Communication) is a variation of RFID (Radio Frequency IDentification) and extremely tamper-proof. The mo.lock digital ignition switch is used to switch the ignition on/off to a distance up to approx. 20 to 40mm. The mechanical ignition switch can be replace... | |
|
|
|
 | | | Buell XB 9/12 2008-2010 stator | €149,00 Add to cart | | Buell XB 9/12 Stator ass, SINGLE PHASE, 30A
Fit's all Buell XB9 and XB12 models from 2008-2010 only.
Twin Motorcycle replacement for OEM 29971-08 and OEM29900066
| |
|
|
|
 | | | Buell Ecm communication device | €67,50 Add to cart | | Buell ECMcommunication device FUELMAPS CAN BE PURCHASED HERE
A must need for every Bueller
Together with a android device ( ECM droid )
also can be used to flash fuel mappings and change settings
device-Name: XBlue_v2
There is no need to pair the XBlue_v2 with the Android device as was required in previous vers... | |
|
|
|
 | | | Buell Intake air temp sensor wire repairkit | €46,00 Add to cart | | Can be used on all fuell injected Buell models X1. S3. And all XB 9/12 2003-2010 and all 1125 R/CR 2008-2010
Intake air temp sensor wire repairkit. This is aeasy way for a repair for to the much troubledintake air temp sensor.
Only a wire end repair is needed As we deliver the connector and wire already fitted. So you... | |
|
|
|
 | | | M relays plus Motogadget electronic push button | €91,10 Add to cart | | mo-RELAY FOR PUSH BUTTON
mo-RELAY + PUSH BUTTON FLASHER RELAY
Combines a load-independent digital flasher relay with electronic push-button controls
Four different operating modes: lane change, turn, continuous flashing and hazard
No additional push-button control unit or load resistor necessary
Constant an... | |
|
|
|
 | | |
|
|
 | | |
|
|
 | | | FLASHER / WAVE DIGITAL FLASHER RELAIS | €54,00 Add to cart | |
Replaces all conventional flasher relays; only uses two cables
Perfect for custom bikes and modifications with limited space
Route through the handlebar, frame tubing or in the cable harness
Constant and correct flashing rate; suitable for almost all LED blinkers and all micro-blinkers
Works with four signal ligh... | |
|
|
|
 | | |
|
|
 | | |
|
All prices are excl. VAT.
