Articles & photos
Back |
27-10-2017 xb studs part 3, 1125 toasted connector
25-11-2017 - What did we do today: 27-10-2017 Buell Xb12 studs part 3, Buell 1125 toasted connector , Buell XB12 engine
we repaired the studs already with bigserts... stud in to tq specs — bij Twin Motorcycles Buell Support forever.
and rear one — bij Twin Motorcycles Buell Support forever.
cylinder on and mounting the pushrod cover — bij Twin Motorcycles Buell Support forever.
head on.. look first for the pushrod cover o-rings than find the dowls in the head — bij Twin Motorcycles Buell Support forever.
drop off oil on the flats and the threads off the head bolts — bij Twin Motorcycles Buell Support forever.
and follow the tightening procedure — bij Twin Motorcycles Buell Support forever.
rocker box on — bij Twin Motorcycles Buell Support forever.
and cover on / coil bracket — bij Twin Motorcycles Buell Support forever.
pipes ready to go on — bij Twin Motorcycles Buell Support forever.
we removed the front mount to have more room. needs to go back on.. red loctite on the bolts — bij Twin Motorcycles Buell Support forever.
and tq these down to 66NM — bij Twin Motorcycles Buell Support forever.
engine half way up to hook up the wiring — bij Twin Motorcycles Buell Support forever.
engine full up and tq the front mount — bij Twin Motorcycles Buell Support forever.
exhaust on and spring tensioner on — bij Twin Motorcycles Buell Support forever.
cables and hoses back on — bij Twin Motorcycles Buell Support forever.
ready for first run... — bij Twin Motorcycles Buell Support forever.
she is purring like a mean tiger... need to do some longer test runs to see if the repair helped — bij Twin Motorcycles Buell Support forever.
1125 in for no charging... connector is burned — bij Twin Motorcycles Buell Support forever.
quick check for the stator... looks ok.. not short to ground, and it charges — bij Twin Motorcycles Buell Support forever.
desided to have a look inside to check the stator and check of oil yet modification is made ... oil line of to remove the cover — bij Twin Motorcycles Buell Support forever.
stator has been replaced already.. looks a little brown.. but no burns — bij Twin Motorcycles Buell Support forever.
rotor always difficult to see out side , but looks like no oiljet is in — bij Twin Motorcycles Buell Support forever.
bolts and nut off — bij Twin Motorcycles Buell Support forever.
and pulled the rotor off... indeed no oil yet ... i will send this one out for the oil jet. to make this a lasting repair — bij Twin Motorcycles Buell Support forever.
engine needs to come out for disasmbly — bij Twin Motorcycles Buell Support forever.
i will first rough clean it... — bij Twin Motorcycles Buell Support forever.
some flat jacks to support the engine — bij Twin Motorcycles Buell Support forever.
and hold the frame in the hoist — bij Twin Motorcycles Buell Support forever.
pinch bolt swingarm axle loose ( no need to remove it ) — bij Twin Motorcycles Buell Support forever.
startmotor feed off — bij Twin Motorcycles Buell Support forever.
swingarm axle out — bij Twin Motorcycles Buell Support forever.
and rear engine mount bolt out — bij Twin Motorcycles Buell Support forever.
pulled out the gearbox breather hose — bij Twin Motorcycles Buell Support forever.
throttle bodie off — bij Twin Motorcycles Buell Support forever.
and straping the swing arm and frame to getter... would anybody be interested in a bracket to hold the frame and swing arm in place ? — bij Twin Motorcycles Buell Support forever.
engine ready to be stripped — bij Twin Motorcycles Buell Support forever.